欢乐生肖计划 - 点此下载

服务热线
0419-5550217
18741987967
产品中心

KLUBER STABURAGS NBU 30 PTM螺纹润滑装配脂

欢乐生肖计划主营进口润滑油产品:瑞士摩托瑞斯指定代理商,意大利TECNOLUBE,法国NYCO,德国克鲁勃 KLUBER,英国罗哥 ROCOL,欢乐生肖计划,德国及日本壳牌SHELL、美孚MOBIL、埃索ESSO、嘉实多 CASTROL,BP, 道达尔TOTAL,福斯FUCHS ,加德士CALTEX,美国润滑油工程公司 LE德国美德孚 METAFLUX, 韩国南邦 NABAKEM,日本德国***,FAG, NSK,THK,LUBE专用润滑脂,等多个国际品牌各种润滑油 18741987967 13841977280 0419-5550217

KlüberStaburagsNBU 30 PTM

KlüberStaburagsNBU 30 PTM是一种非常粘合的组装润滑脂。

KlüberStaburagsNBU 30 PTM是一种润滑和组装润滑脂。

适用于您的应用程序

 - 装配润滑脂,防止摩擦腐蚀

 - 良好的防腐蚀性

 - 即使在室外条件下也具有出色的耐水性

 - 由Knorr Bremse公司批准,N 12006-37

描述

STABURAGS NBU 30 PTM是一种含有固体润滑剂的组装润滑脂。它具有耐水性和防止摩擦腐蚀(微动腐蚀)。它已经证明在高湿度的户外应用中是有效的。

应用

STABURAGS NBU 30 PTM适用于装配滑动间隙配合的应用的装配润滑脂。应用包括冷热水阀门和水龙头,滑道(特别是在灌装机中),阀门主轴和气缸导轨。该产品也可用作密封油脂。此外,它适用于滑道,螺栓,主轴和螺钉的润滑,例如,在铁路转向架组件。 STABURAGS NBU 30 PTM特别适用于轨道车辆的外部制动部件,例如螺栓和杆。 STABURAGS NBU 30 PTM便于装配和拆卸车辆中的ABS传感器。

应用笔记

使用气溶胶喷涂版本的STABURAGS NBU 30 PTM进行铁路制动器部件的再润滑,其中没有加入油嘴。为了最佳地渗透到精细间隙中,我们建议喷涂至少8秒钟。这将提高轨道车辆中制动杆的效率,从而确保最长的维护间隔。当用于装配和润滑目的时,我们建议通过无绒布,手工或刷子将润滑剂轻轻涂抹在部件表面上。 STABURAGS NBU 30 PTM在低温至最低温度下显示出良好的粘合强度。 -40°C。Klüber Staburags NBU 30 PTM

Klüber Staburags NBU 30 PTM Is a very adhesive assembly grease.

Klüber Staburags NBU 30 PTM is a Lubricating and assembly grease.

Benefits for your application

– Assembly grease protecting against tribo-corrosion

– Good corrosion protection

– Excellent resistance to water even under outdoor conditions

– Approved by the company Knorr Bremse, N 12006-37

Description

STABURAGS NBU 30 PTM is an assembly grease containing a solid lubricant. It is resistant to water and protects against tribocorrosion (fretting corrosion). It has proven effective in outdoor applications subject to high humidity.

Application

STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies. STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods. STABURAGS NBU 30 PTM facilitates assembly and disassembly of ABS sensors in vehicles.

Application notes

Use the aerosol spray version of STABURAGS NBU 30 PTM for relubrication of railway brake parts where no grease nipple is incorporated. For optimum penetration into fine clearances we recommend spraying for at least 8 seconds. This will increase efficiency of brake rods in rail vehicles thus ensuring the longest maintenance intervals. When used for assembly and lubricating purposes we recommend the lubricant be lightly applied to the component surfaces via a lint free cloth, by hand, or by brush. STABURAGS NBU 30 PTM shows good adhesive strength at low temperatures down to min. -40 °C.

KlüberStaburagsNBU 30 PTM

KlüberStaburagsNBU 30 PTM是一种非常粘合的组装润滑脂。

KlüberStaburagsNBU 30 PTM是一种润滑和组装润滑脂。

适用于您的应用程序

 - 装配润滑脂,防止摩擦腐蚀

 - 良好的防腐蚀性

 - 即使在室外条件下也具有出色的耐水性

 - 由Knorr Bremse公司批准,N 12006-37

描述

STABURAGS NBU 30 PTM是一种含有固体润滑剂的组装润滑脂。它具有耐水性和防止摩擦腐蚀(微动腐蚀)。它已经证明在高湿度的户外应用中是有效的。

应用

STABURAGS NBU 30 PTM适用于装配滑动间隙配合的应用的装配润滑脂。应用包括冷热水阀门和水龙头,滑道(特别是在灌装机中),阀门主轴和气缸导轨。该产品也可用作密封油脂。此外,它适用于滑道,螺栓,主轴和螺钉的润滑,例如,在铁路转向架组件。 STABURAGS NBU 30 PTM特别适用于轨道车辆的外部制动部件,例如螺栓和杆。 STABURAGS NBU 30 PTM便于装配和拆卸车辆中的ABS传感器。

应用笔记

使用气溶胶喷涂版本的STABURAGS NBU 30 PTM进行铁路制动器部件的再润滑,其中没有加入油嘴。为了最佳地渗透到精细间隙中,我们建议喷涂至少8秒钟。这将提高轨道车辆中制动杆的效率,从而确保最长的维护间隔。当用于装配和润滑目的时,我们建议通过无绒布,手工或刷子将润滑剂轻轻涂抹在部件表面上。 STABURAGS NBU 30 PTM在低温至最低温度下显示出良好的粘合强度。 -40°C。Klüber Staburags NBU 30 PTM

Klüber Staburags NBU 30 PTM Is a very adhesive assembly grease.

Klüber Staburags NBU 30 PTM is a Lubricating and assembly grease.

Benefits for your application

– Assembly grease protecting against tribo-corrosion

– Good corrosion protection

– Excellent resistance to water even under outdoor conditions

– Approved by the company Knorr Bremse, N 12006-37

Description

STABURAGS NBU 30 PTM is an assembly grease containing a solid lubricant. It is resistant to water and protects against tribocorrosion (fretting corrosion). It has proven effective in outdoor applications subject to high humidity.

Application

STABURAGS NBU 30 PTM is suitable as an assembly grease for applications incorporating sliding clearance fits. Applications include hot and cold water valves and taps, slideways (especially in filling machines), valve spindles and cylinder guides. The product can also be used as a sealing grease. In addition, it is suitable for the lubrication of slideways, bolts, spindles and screws, e.g. in railway bogie assemblies. STABURAGS NBU 30 PTM is especially suitable for external brake components of rail vehicles, such as bolts and rods. STABURAGS NBU 30 PTM facilitates assembly and disassembly of ABS sensors in vehicles.

Application notes

Use the aerosol spray version of STABURAGS NBU 30 PTM for relubrication of railway brake parts where no grease nipple is incorporated. For optimum penetration into fine clearances we recommend spraying for at least 8 seconds. This will increase efficiency of brake rods in rail vehicles thus ensuring the longest maintenance intervals. When used for assembly and lubricating purposes we recommend the lubricant be lightly applied to the component surfaces via a lint free cloth, by hand, or by brush. STABURAGS NBU 30 PTM shows good adhesive strength at low temperatures down to min. -40 °C.

产品详情